| Polyethersulfone
(PES) Membrane / Polypropylene Structure |
B E G P Biological,
Electronic, General, Pharmaceutical |
Cartridge Capsule |
0.04, 0.1, 0.2, 0.45, 0.65, 0.8 |
Absolute | -
Prefiltration, sterilization, and final filtration of biologicals, parenterals,
ophthalmics and formulation waters |
| - Pre-and final filtration of beer, wine and
juices |
| -
Chemicals, recirculationg etch baths, UPW systems, and POU filtration |
| 100% Fluoropolymer
Construction | E Electronic |
Cartridge |
0.05, 0.1, 0.2, 0.45, 1.0 |
Absolute | -
Ultrapure chemical processing and distribution; gas filtration |
| - Applications where
100 % fluoropolymer construction is required |
| 100% Fluoropolymer
Construction Capsules | E Electronic |
Capsule |
|
Absolute | -
Critical filtration of aggressive acids, bases, strippers, developers, and solvents
where introduction of contamination during cartridge changeout is of concern and
100% fluoropolymer construction is required. |
| PTFE
Membrane / Polypropylene Supports | E
G P Electronic, General,
Pharmaceutical | Cartridge
Capsule | 0.05,
0.1, 0.2, 0.45, 1.0 | Absolute | -
Sterile venting; sterile filtration of compressed gasses; final filtration of
solvents and pharmaceutical intermediates. |
| - Tank venting; sterile
filtration of gasses used for aeration. |
| -
Ultrapure gas and chemical processing, photochemical processing |
| Polypropylene
Depth Media / Polypropylene Structure |
A G All
Purpose, General, | Cartridge |
0.6, 1.2, 2.5, 5, 10, 20, 40 |
Nominal | -
DI water filtration; beverage and pharmaceutical prefiltration |
| -
Serum and vaccine processing |
| -
Solvent and gas prefiltration |
| -
General filtration |
| Polypropylene
Depth Media / Polypropylene Structure |
G
General, | Cartridge |
0.6 |
Absolute | -
DI water filtration; beverage and pharmaceutical prefiltration |
| - Serum and vaccine processing |
| - Solvent and gas prefiltration |
| Polypropylene
Depth Media / Polypropylene Structure |
A G All
Purpose, General, | Cartridge |
|
Nominal | -
Prefiltration of DI water, beverages, biologicals, orals, tropicals, and diagnostics
reagents |
| -
General filtration of sanitization agents, solvents, and photochemicals |
| Polypropylene
Membrane / Polypropylene Structure |
G General, |
Cartridge |
0.1, 0.2 |
Absolute | -
Final filtration of photochemicals during primary production formulation and end
product use |
| -
Gas filtration |
| -
Chemical processing |
| PTFE Membrane
/ High Density Polyethylene Structure |
E G A Electronic,
General, All Purpose |
Cartridge |
0.05, 0.1, 0.2 |
Absolute | -
Purification of photoresists, chemicals, and etch baths |
| - Filtration of solvents,
cleaning solutions |
| Glass
or Polyporpylene Prefilter on Polyethersulfone (PES) Membrane / Polypropylene
Structure | B
G A Biological, General,
All Purpose | Cartridge |
0.2, 0.5 |
Nominal | -
Filtration of buffers, sanitization solutions |
| - Prefiltration of biologicals,
sera, orals, topicals, diagnostic reagents, DI water |
| -
Pre-and final filtration of wine, beer and juices |
| Micro
Glass Depth Media / Polypropylene Structure |
G General |
Cartridge |
0.25, 0.5, 1, 3, 5 |
Nominal | -Clarification
of beverages; biologicals and therapeutics |
| - Ink filtration; chemical
filtration |
| -
General filtration |
| 316L Stainless
Steel Depth Media / 316L Stainless Steel Structure |
A All
Purpose | Cartridge |
0.5, 1, 3, 5, 10, 20, 40 |
Nominal |
- Clarification at high pressure, temperature, or with high viscosity |
| -
Filtration of steam and aggressive gasses |
| |
| |
|
|
|
|
| Microelektronics | Biotechnology
Pharmaceutical | Ultrapure Chemicals |
Industrial | Food and Beverage |
|
