|
| | |
| Portable Isolation Chamber |
|
The Portable Isolation Chamber is designed for rapid setup of a biologically
isolated space from a clean outside environment. The IsoArk is a complete solution
for turning any room or space into a biologically contained area, allowing for
the isolation of infected or contaminated people and matter. The entire system
meets and easily exceeds today's standards for aiborne infection isolation, including
the 2003 CDC guidelines for healthcare infection control. Other applications may
include mail screening, workplace safety in harmful dust environments and temporary
laboratory work. |
| |
| Features
|
| Developed together
with the Kaplan Medical Center |
|
Well-tried and tested in succesful hospital service |
|
Quick exit through high flushing airlock which enables shortest dwell times |
|
Quick exit through high flushing airlock which enables shortest dwell times |
|
Very simple and fast assembly withouth the need of tools |
|
Cost effective and flexible |
| |
|
The airlock attached tothe main chamber provides the capability to move easily
in and out of the isolated area without loosing the negative pressure or contaminating
the outside environment. This system gives the option to focus on treatment from
outside avoiding staff and decontamination of equipment. Required equipment can
be placed outside the chamber and probes, hoses and cables can be passed through
utility sleeves into the isolated area. Additionally a glove box allows access
to the enterior of the chamber without entering it. The integrated Filtration
System FA 2000 combines a high efficient HEPA-filter and a UV-radiation source
which enables the best available biological protection againts contamination threats.
The system draws contaminated air from within the chamberthrough a prefilter followed
by HEPA-Filter and discharges the purified air into the outside environment. A
UV-radiation source contained within the filters kills the microorganism trepped
inside, which prevents the accumulation of living micro-organisms in the system.
Those features contribute to offer a cost effective and practical alternative
to costly and permanent isolation rooms which can provide the necessary isolation
protection within minutes. |
|
| |
|
| The main chamber
is constructed from a lightweight aluminum "quick connect" structure,
supporting the transparent chamber liner which is made from special resistant
laminate. |
| |
 | The
airlock is a self supporting construction consisting of wide double swing doors
for quick and easy access with equipment or beds. When entering the airlock an
electro-optical eye switches automatically the filtration system to the high flush
mode, increasing the airflow through the airlock many fold. This reduces
dramatically the wait time for a complete air change in the airlock and ensures
that negative ptessure is maintained even when entering or exiting the chamber. |
|
| Features |
|
Auto activaiton sensor |
|
Extremely low noise level |
|
Filter condition indicator |
|
Simple filter exchange without the need of tools |
| |
| The
filtration system has three different airflow modes, allowing quick air flushing
when needed while minimizing noise level and energy use when high flush rates
are not required. Additionally the system is equipped with a differential
pressure gauge, indicating the condition of the HEPA-Filter. For Filter -or UV-
unit replacement no tools are required. | | | | | Applicable
Standarts | | Quality Control according
to ISO 9001:2000 | | Quality Assurance
AQAP 2110 | | HEPA-filter efficiency
EN 1822 IEST-PR-CC001.3 | | Certified
according UL 507 CSA 113 UL 60601 | | |
|
| |
| | Negative
Pressure Indicator | The negative
pressure indicator controls the current under pressure in the main chamber. If
the negative pressure drops out of the acceptable range the red light starts to
blink and an audible buzzer gives alarm. An integrated potential free contact
enables tracking of the pressure status by connection to an computer or an alarm
system. The pressure indicator is installed at the outside of the IsoArk airlock
and an air pipe connects the main chamber with its measure point. |
|
|
| The internal utility raks are holding
equipment and connection facilities required inside the Isolation Chamber. The
cables and hoses of the equipment can be routed into the chamber through utility
sleeves which are incorporated into the chamber liner. |
| |
| The small transport container
houses the filtration system FA 200 HS. |
|
|
| |
|
| The waste box enables a
safe disposal of waste from the enterior of the chamber/airlock. Through an incorporated
sleeve the waste is thrown into a bag which can be airtight closed for disposal. |
| |
| The
large transport container houses the trolley which is able to hold all the equipment
required to build the IsoArk system (excluding the filtration system). Therefore
the equipment can be moved easily whereever it is tequired to assemble the IsoArk
system. |
|
|
| |
|
| The
optional available transport containers provide a compact and safe packaging for
the IsoArk components. the containers are stackable and transportable with a forklift
which allows storing of 24 complete IsoArk system on one 40 ft container. |  |
|
| |
| 
Specifications
are subject to change without prior notice |
*Dimensions
available on request | |
| |
| |